Tempro Direct 120
Tempro
Direct Plus 120
|
Equipped
with a Self-optimizing microprocessor controller (+/-1 C°)
for temperatures
up to 120 C°. Powerful pumps (pressure up to 6 bar) guarantee
a high flow of rocess
water and thus a short preheating time and because of it‘s
direct cooling design,
a high cooling capacity.
2 models:
Tempro
direct 120
The economic solution
offering high flow rate pumps
and reinforced cooling.
Tempro plus direct 120
equipped with additional
monitoring functions:
Two pressure sensors
monitor the differential pressure between the supply
and return pressure from the mold, in order to show the precise
flow rate
through the mold. A deviation in flow rate and pressure over
or below the set
values will activate an alarm. When air purging the mold, the
return water is
pumped into the cooling system, allowing large volumes to be
purged.
• Standard
equipment o Optional equipment – Cannot
be supplied for this model.
| TEMPRO
direct |
120 |
plus
120 |
| Microprocessor
controller, Self-optimizing |
• |
• |
| Maximum
temperature monitoring |
• |
• |
| Automatic
pump rotation direction detection |
– |
• |
| Automator
filling with pressure monitoring |
• |
– |
| Sensor
break monitoring |
• |
• |
| Pressure
indication and monitoring |
– |
• |
Flow
indication and monitoring
|
– |
• |
| Adjustable
maximum internal pressure |
– |
• |
| Air
purging for mold changes |
o |
• |
| Dry
contact for alarm output + audible alarm |
• |
• |
| Connector
for external sensor (PT100) |
o |
o |
| Pump
made of stainless steel |
o
|
o |
| Serial
interface to Imm |
– |
o |
| Operating
hour counter |
• |
• |
| Horn |
• |
• |
|
| Technical
Data |
direct
120 |
plus
120 |
| Heating
capacity |
9
kW |
6
kW |
| Pump
capacity standard |
0.75
kW, max. 6 bar max.
60 l/min max. |
0.5
kW, max.
5 bar 30 l/min |
| Pump
capacity enhanced |
1,5
kW, max.
4,8 bar max.
65 l/min max. |
2,2
kW, max.
5,7 bar
82
l/min max. |
0.75
kW, max.
6 bar max.
60 l/min |
| Cooling
water connection |
G
1/2“ |
G
3/8“ |
| Mold
connection |
G
1“ |
G
3/4“ |
| Power
supply |
3
x 400 V/50 Hz + MP |
|
|
