Tempro XL 90
|
Water units
Wittmann‘s
new Tempro plus 90 XL can
heat up even big molds
within a short time to the required set point. Besides the
strong heater
(36 kW) we reinforced flow (up to 200 l/min.) and cooling capacity.
Purge
out of molds is supported by an additional pump which pumps
the water to the return line or drain. Thus the purge volume
is unlimited.
• Standard
equipment o Optional equipment – Cannot
be supplied for this model.
| TEMPRO
XL 90 |
XL
90 |
| Microprocessor
controller, Self-optimizing (+/- 1 C°) |
• |
| Maximum
temperature monitoring |
• |
| Sensor
break monitoring |
• |
| Automator filling with leakage monitoring and level control |
• |
| Automatic
pump rotation direction detection |
• |
| Dry
contact for alarm output plus audible alarm |
• |
| Connectors
for external sensors (PT100) |
• |
| Leakstop
function |
• |
| Air
purging for mold changes |
• |
| Pressure
gauge / flow indication |
o |
| Serial
interface (RS232, RS485, 20mA, EUROMAP 17) |
o |
| Operating
hour counter |
• |
| Horn |
• |
|
| Technical
Data |
XL
90 |
| Heating
capacity |
18
/ 36 kW |
| Pump
standard
T1001-50/60 Hz |
2,2
kW, max. 5 bar max. 100 l/min |
| Pump
enhanced T2001-50/60 Hz |
2,8
kW, max. 5 bar max.
200 l/min |
| Cooling
water connection |
G
3/4 “ |
| Mold
connection |
G
1 1/4” |
| Power
supply |
3
x 400 V/50 Hz + MP |
|
|
