For the removal of sprues and parts from an injection molding machine. The solid construction allows fast movements with low vibration for precise removal.

X-axis (kick stroke):

• Heavy-duty linear rails and recirculating ball bearings.
• Swivel base to rotate the arm behind the fixed platen for mold changes with locating pin to precisely reposition arm for part removal.

Y-axis (vertical stroke):

• Adjustable stroke 0-21,7“ (550 mm) or 27,6“ (700 mm).
• Pneumatic shock absorbers.
• Locking cylinder to prevent the arm from drifting down into the mold
  in the event of air pressure loss.
• The Y-axis is also equipped with a heavy-duty switch as an additional
  interlock before the mold can close.
• Energy chain for less wear of tubing.

Z-axis (pivot):

• Freely adjustable 45° – 95°.
• Simple change-over from rear side to operator side placement.

B-axis (90° tooling rotation):

• Rotation is made automatically when pivoting the Z-arm out of the press.

Mechanical Sprue Gripper:

• Rotation is made automatically when pivoting the Z-arm out of the press.

• For W702 and W710
• Easy to use interface with graphical LCD display. Arrangement of buttons and symbols is similar to the R7 Robot control for easier use by the operators.
• Simple sequence start.
• Simple Teach-In programming of the entire program sequence, including
  all movements, strokes, time settings and molding machine interface.
• 4 standard programs for easy setup.
• Up to 50 additional individual programs can be taught and stored.
• Standard molding machine interface (SPI & E12).
• Full diagnostics with text error messages.
• Different languages are included and can be selected:
  English, German, French, Spanish, Chinese, etc.